Peerless-AV PLAV70-UNLP Mounting Arm for Flat Panel Display - 42" to 60" Screen Support - 90.72 kg Load Capacity - Steel - Black (PLAV70-UNLP)

Device Supported: Flat Panel Display
Maximum Load Capacity: 90.72 kg
Maximum Screen Size Supported: 60"
Color: Black
Weight (Approximate): 28.58 kg
Package Contents:
• PLAV70-UNLP Articulating Dual-Arm with Vertical Adjustment
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 2 x Wall support arm axle
• 3 x Vinyl trim
• 8 x Screw bolt (M10 x 1.5 x 15 mm)
• 1 x Nylon washer (.505 x .75 x .062" )
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25" )
• 4 x Delrin washer (1.525 x 2 x .062" )
• 2 x Socket head cap screw (#8-32 x .375" )
• 6 x Plastic finishing cap
• 2 x Holding pin
• 2 x Retainer plug
• 8 x Wood screw (5/16 x 3")
• 8 x Washer (.250 x 1 x .068" )
• 1 x Allen wrench (9/64")
• 8 x Cable management clips
• 8 x Cable tie
• 2 x Polyester mesh sleeve (36")
• 1 x Allen wrench (6 mm)
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench
• Phillips Adapter Bracket Fasteners
• 4 x (M6 x 20 mm)
• 4 x (M6 x 30 mm)
• 6 x Multi-washer
• 6 x (M8 x 16 mm)
• 4 x (M8 x 40 mm)
• 6 x (M4 x 12 mm)
• 4 x (M4 x 25 mm)
• 4 x (M5 x 12 mm)
• 4 x (M5 x 25 mm)
• 4 x (M6 x 12 mm)
• 4 x (M6 x 25 mm)
• 4 x (I.D. 5.6 mm)
• 4 x (M8 x 25 mm)
• 4 x (I.D. 8.7 mm)

Compatibility: Plasma and LCD Flat Panel Screens: 42" - 60"
Country of Origin: United States
Limited Warranty: 5 Year

Designed to handle the heaviest displays, the PLAV70 features dual-arm, all-steel construction that holds displays up to 95" and weighing up to 200lb. The PLAV70's self-lubricating bushingsenable your display to smoothly articulate, while adjustable tilt and pivot allow you to position your display for the optimal viewing angle. Swing, tilt and extend your display, even in and outof recessed cubby holes and custom frames with the vertical adjustment feature that providesthe capability to raise or lower your display for a perfectly aligned installation.

• PLAV70-UNLP Articulating Dual-Arm with Vertical Adjustment
• 1 x Wall plate
• 1 x Tilt-roll assembly
• 1 x Arm assembly
• 2 x Wall support arm axle
• 3 x Vinyl trim
• 8 x Screw bolt (M10 x 1.5 x 15 mm)
• 1 x Nylon washer (.505 x .75 x .062" )
• 1 x Tilt adjustment knob
• 1 x Carriage bolt (3/8"-16 x 3.25" )
• 4 x Delrin washer (1.525 x 2 x .062" )
• 2 x Socket head cap screw (#8-32 x .375" )
• 6 x Plastic finishing cap
• 2 x Holding pin
• 2 x Retainer plug
• 8 x Wood screw (5/16 x 3")
• 8 x Washer (.250 x 1 x .068" )
• 1 x Allen wrench (9/64")
• 8 x Cable management clips
• 8 x Cable tie
• 2 x Polyester mesh sleeve (36")
• 1 x Allen wrench (6 mm)
• 1 x Adapter bracket
• 2 x Shallow adapter bracket
• 2 x Deep adapter bracket
• 1 x Allen wrench
• Phillips Adapter Bracket Fasteners
• 4 x (M6 x 20 mm)
• 4 x (M6 x 30 mm)
• 6 x Multi-washer
• 6 x (M8 x 16 mm)
• 4 x (M8 x 40 mm)
• 6 x (M4 x 12 mm)
• 4 x (M4 x 25 mm)
• 4 x (M5 x 12 mm)
• 4 x (M5 x 25 mm)
• 4 x (M6 x 12 mm)
• 4 x (M6 x 25 mm)
• 4 x (I.D. 5.6 mm)
• 4 x (M8 x 25 mm)
• 4 x (I.D. 8.7 mm)