Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable (PDUMH20AT)

PDU

Tripp Lite PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet - 16 x NEMA 5-15/20R - 2.4kVA - 1U Rack-mountable (PDUMH20AT)

  • SKU: PDUMH20AT
  • Vendor:Tripp Lite
Availability:Out Stock
$476.87
  • Input Receptacles: 2 x NEMA L5-20P
  • Output Receptacles: 16 x NEMA 5-15/20R
  • Input Voltage: 120 V AC
  • Output Voltage: 120 V AC
  • Power Rating: 2.40 kVA
  • Management:
    • Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass
    • Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
    • Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP
  • Form Factor: Rack-mountable
  • Rack Height: 1U
  • Height: 1.75" (44.45 mm)
  • Width: 17.50" (444.50 mm)
  • Depth: 14.50" (368.30 mm)
  • Weight (Approximate): 5.53 kg
  • Package Contents:
    • PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
    • PDU with attached L5-20P input power cord
    • Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input
    • Two NEMA L5-20R to NEMA 5-20P plug adapters
    • User manual with warranty information
  • Environmentally Friendly: Yes
  • TAA Compliant: Yes
Specifications
Manufacturer: Tripp Lite
Manufacturer Part Number: PDUMH20AT
Manufacturer Website Address: http://www.tripplite.com
Brand Name: Tripp Lite
Product Model: PDUMH20ATNET
Product Name: PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
Marketing Information:

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.


Product Type: PDU
Technical Information
Input Receptacles: 2 x NEMA L5-20P
Output Receptacles: 16 x NEMA 5-15/20R
Power Description
Input Voltage: 120 V AC
Output Voltage: 120 V AC
Power Rating: 2.40 kVA
Management
Management:
  • Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass
  • Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
  • Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP

Physical Characteristics
Form Factor: Rack-mountable
Rack Height: 1U
Height: 1.75" (44.45 mm)
Width: 17.50" (444.50 mm)
Depth: 14.50" (368.30 mm)
Weight (Approximate): 5.53 kg
Miscellaneous
Package Contents:
  • PDUMH20AT PDU Metered ATS 120V 20A 16 Outlet
  • PDU with attached L5-20P input power cord
  • Detachable C19 to NEMA L5-20P 12 ft/3.6m power cord for optional secondary input
  • Two NEMA L5-20R to NEMA 5-20P plug adapters
  • User manual with warranty information

Environmentally Friendly: Yes
TAA Compliant: Yes