Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
ComNet CNFE2002S1APOE/HO/M 2-Channel Fiber Media Converter - 2 x 60W PoE++ RJ-45 Ports - 1x ST Single-Mode Fiber - 20 km - 10/100 Mbps
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This media converter operates with 10/100Base-TX Fast Ethernet technology, delivering up to 100 Mbps data transfer rates over twisted pair connections. The fiber interface supports single-mode optical fiber with dual wavelengths of 1310 nm and 1550 nm, enabling long-distance transmission up to 20 km (12.43 miles) with minimal signal loss.
The unit features a total of three ports: two RJ-45 ports that provide 60W PoE++ power per port (PD type) for connected devices, and one ST simplex port for fiber connectivity. This configuration allows simultaneous data conversion and power delivery, reducing the need for separate power supplies at remote endpoints.
This section brings together practical product details such as Total Number of Ports, Network (RJ-45), Number of 60W PoE (RJ-45) Ports, Media Type Supported, so buyers can judge configuration, deployment fit, and day-to-day suitability with less guesswork.
Key Product Advantages
This converter simplifies network expansion by combining media conversion with high-power PoE++ delivery in a compact, reliable package. Its ability to extend Ethernet over fiber up to 20 km makes it suitable for campus, industrial, or surveillance applications where long-distance connectivity is required.
Integrated PoE++ Power
Two 60W PoE++ ports deliver power to connected devices, eliminating the need for local power sources at remote locations and reducing installation complexity.
- PD (Powered Device) type
- Supports high-power devices like PTZ cameras
Long-Distance Fiber Connectivity
Single-mode fiber support with 20 km reach enables network extension beyond copper limitations, ideal for connecting buildings or remote equipment.
- 1310 nm and 1550 nm wavelengths
- ST simplex connector
Deployment / Use Cases
This media converter is engineered for scenarios requiring both network extension and remote device powering. Its combination of fiber conversion and PoE++ makes it particularly valuable in environments where electrical infrastructure is limited or where long-distance signal integrity is critical.
Common applications include connecting IP surveillance cameras across large facilities, extending network access to remote wireless access points in campus settings, and linking network segments between buildings in industrial parks. The converter's compact form factor allows for flexible mounting in network cabinets, wall boxes, or equipment rooms.
Surveillance and Security
Power and connect IP cameras over long distances using fiber backbone, with PoE++ supporting high-power cameras and heaters.
Campus Network Extension
Bridge network segments between buildings with fiber, while providing PoE to access points or phones at remote locations.
Physical Profile
The converter measures 3.70" (93.98 mm) wide, 4.10" (104.14 mm) deep, and 1.10" (27.94 mm) high, making it compact enough for space-constrained installations. Its environmentally friendly design and lifetime warranty reflect robust construction for continuous operation in commercial and industrial settings.
The physical profile is practical for deployment planning because the dimensions and weight are clearly defined: 1.10" (27.94 mm), 3.70" (93.98 mm), 4.10" (104.14 mm). This helps confirm rack, shelf, desk, or cabinet fit before installation.
- Width
- 3.70" (93.98 mm)
- Depth
- 4.10" (104.14 mm)
- Height
- 1.10" (27.94 mm)
- Length
- 1310 nm,1550 nm
Highlights
- Converts 10/100 Mbps Ethernet between twisted pair and single-mode fiber
- Two 60W PoE++ RJ-45 ports power connected devices directly
- Single ST simplex fiber port supports 20 km reach
- Dual wavelengths: 1310 nm and 1550 nm for flexible fiber deployment
- Fast Ethernet (10/100Base-TX) technology for up to 100 Mbps throughput
- Compact dimensions: 3.70" W x 4.10" D x 1.10" H
- Environmentally friendly design
- Lifetime warranty for long-term reliability
Specifications
| Specifications | |
|---|---|
| Manufacturer | ACRE |
| Manufacturer Part Number | CNFE2002S1APOE/HO/M |
| Brand Name | ComNet |
| Product Series | CNFE200(X)POE(M,S)(1,2)[HO][/M] |
| Product Name | 2 Ch 10/100 Mbps Ethernet 1310/1550nm, 60 W PoE++, A Side |
| Product Type | Transceiver/Media Converter |
| Interfaces/Ports | |
| Total Number of Ports | 3 |
| Network (RJ-45) | Yes |
| Number of 60W PoE (RJ-45) Ports | 2 |
| PoE Port Type | PD |
| Number of ST Ports | 1 |
| ST Port Type | Simplex |
| Media & Performance | |
| Media Type Supported | Optical Fiber,Twisted Pair |
| Fiber Mode Supported | Single-mode |
| Fiber Optic Cable Wavelength | 1310 nm,1550 nm |
| Maximum Distance Supported | 20 km (12.43 Mile) |
| Network & Communication | |
| Ethernet Technology | Fast Ethernet |
| Network Technology | 10/100Base-TX |
| Power Description | |
| Power Source | AC Adapter |
| Physical Characteristics | |
| Height | 1.10" (27.94 mm) |
| Width | 3.70" (93.98 mm) |
| Depth | 4.10" (104.14 mm) |
| Miscellaneous | |
| Environmentally Friendly | Yes |
| Country of Origin | United States |
| Warranty | |
| Limited Warranty | Lifetime |
FAQ
What types of network connections does this media converter support?
This converter supports Fast Ethernet (10/100Base-TX) over both twisted pair copper via its two RJ-45 ports and single-mode fiber optic via its ST simplex port. It converts between these media types, allowing network extension up to 20 kilometers over fiber while maintaining 100 Mbps data rates.
How much PoE power does each RJ-45 port provide?
Each of the two RJ-45 ports delivers up to 60W of PoE++ power, following the PD (Powered Device) standard. This high power output supports devices like PTZ cameras, wireless access points with multiple radios, or other equipment requiring substantial power over Ethernet.
What is the maximum distance supported over fiber?
The converter supports fiber optic transmission up to 20 kilometers (12.43 miles) when using single-mode fiber with 1310 nm or 1550 nm wavelengths. This long reach makes it suitable for connecting network segments across large campuses, industrial sites, or between buildings.
What type of fiber connector does this converter use?
It uses one ST simplex connector for fiber connectivity. ST connectors are common in single-mode fiber installations and provide reliable, stable connections for long-distance network links.
Does this converter require external power?
Yes, the converter is powered by an included AC adapter. The adapter provides power for the converter itself and for the PoE++ output to connected devices via the RJ-45 ports.
What are the physical dimensions of this unit?
The converter measures 3.70 inches (93.98 mm) wide, 4.10 inches (104.14 mm) deep, and 1.10 inches (27.94 mm) high. Its compact size allows for flexible installation in network cabinets, wall mounts, or equipment racks.
| Qty | Price | Available |
|---|
