Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
AddOn FC95704ABA-AO Compatible TAA 1000Base-DWDM SFP Transceiver - 1Gbps - 1547. 72nm - 80km - LC - Single-Mode - DOM
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This SFP transceiver implements the 1000Base-DWDM standard, providing 1Gbps full-duplex data transfer rates over single-mode optical fiber. The module utilizes DWDM technology to transmit data on specific wavelength channels, enabling multiple signals to share the same fiber infrastructure without interference.
The 1547.72nm operating wavelength falls within the C-band spectrum commonly used in long-haul optical networks. With an 80-kilometer reach capability, this transceiver supports metropolitan and regional network deployments where extended distance transmission is required.
This section brings together practical product details such as Application/Usage, Features, Total Number of Ports, Connector Type, so buyers can judge configuration, deployment fit, and day-to-day suitability with less guesswork.
Key Product Advantages
This transceiver combines extended reach capabilities with precise wavelength control for reliable optical network performance. The TAA compliance ensures eligibility for government and educational procurement, while the lifetime warranty provides long-term investment protection.
Extended Distance Performance
With 80-kilometer reach over single-mode fiber, this transceiver supports long-distance connections between network nodes without requiring signal regeneration equipment.
- Ideal for metro network links
- Reduces intermediate equipment needs
- Maintains signal integrity over distance
Monitoring Capabilities
Digital Optical Monitoring (DOM) enables real-time tracking of optical parameters including transmit power, receive power, temperature, and voltage for proactive network management.
- Early fault detection
- Performance optimization
- Simplified troubleshooting
Compliance & Reliability
TAA compliance meets trade agreement requirements for government purchases, while the hot-swappable design allows for maintenance and upgrades without network downtime.
- Government procurement eligible
- Hot-swappable for zero downtime
- Lifetime warranty coverage
Deployment / Use Cases
This 1000Base-DWDM SFP transceiver is optimized for data networking environments requiring extended reach and wavelength-specific transmission. The precise 1547.72nm wavelength makes it suitable for DWDM system deployments where channel planning and spectral efficiency are critical.
Typical applications include metropolitan area network (MAN) connections, campus network backbones, data center interconnects, and service provider network infrastructure. The 80-kilometer reach supports connections between geographically dispersed facilities without intermediate optical amplification.
Metropolitan Network Links
Connect network nodes across city-wide distances using existing single-mode fiber infrastructure with DWDM efficiency.
- Inter-building connectivity
- Municipal network deployments
- Educational campus networks
Data Center Interconnects
Establish high-speed links between data center facilities for disaster recovery, workload balancing, and storage replication.
- Disaster recovery links
- Storage area networks
- Cloud connectivity
Physical Profile
The compact SFP form factor measures 0.40" (10.16 mm) in height, 1.20" (30.48 mm) in width, and 2.60" (66.04 mm) in depth, with an approximate weight of 3.20 oz (90.72 g). This standardized dimensions ensure compatibility with SFP slots in network equipment from various manufacturers. The hot-swappable design facilitates installation and replacement without powering down connected devices.
- Width
- 1.20" (30.48 mm)
- Depth
- 2.60" (66.04 mm)
- Height
- 0.40" (10.16 mm)
- Weight
- 3.20 oz (90.72 g)
- Length
- 1547.72 nm
Highlights
- 1000Base-DWDM SFP transceiver with 1Gbps data transfer rate
- Operates at 1547.72nm wavelength for precise DWDM channel allocation
- Supports transmission distances up to 80 kilometers over single-mode fiber
- LC connector interface for reliable optical connections
- Digital Optical Monitoring (DOM) for real-time performance tracking
- TAA compliant for government and educational procurement eligibility
- Hot-swappable form factor for easy installation and maintenance
- Lifetime limited warranty for long-term reliability assurance
- Compatible with Fujitsu network equipment platforms
- Manufactured in United States/United Kingdom facilities
Specifications
| Specifications | |
|---|---|
| Manufacturer | AddOn |
| Manufacturer Part Number | FC95704ABA-AO |
| Brand Name | AddOn |
| Product Name | Fujitsu SFP Module |
| Product Type | SFP |
| Packaged Quantity | 1 |
| Technical Information | |
| Application/Usage | Data Networking,Optical Network |
| Features | Digital Optical Monitoring (DOM) |
| Interfaces/Ports | |
| Total Number of Ports | 1 |
| Connector Type | LC |
| Interfaces/Ports Details | LC 1000Base-DWDM Network |
| Media & Performance | |
| Media Type Supported | Optical Fiber |
| Fiber Optic Cable Wavelength | 1547.72 nm |
| Fiber Mode Supported | Single-mode |
| Ethernet Technology | Gigabit Ethernet |
| Network Technology | 1000Base-DWDM |
| Maximum Distance Supported | 80 km (49.71 Mile) |
| Maximum Data Transfer Rate | 1 Gbit/s |
| Physical Characteristics | |
| Form Factor | Hot-swappable |
| Height | 0.40" (10.16 mm) |
| Width | 1.20" (30.48 mm) |
| Depth | 2.60" (66.04 mm) |
| Weight (Approximate) | 3.20 oz (90.72 g) |
| Miscellaneous | |
| Country of Origin | United States/United Kingdom |
| TAA Compliant | Yes |
| Warranty | |
| Limited Warranty | Lifetime |
User Manual
FAQ
What is the maximum transmission distance of this SFP transceiver?
This 1000Base-DWDM SFP transceiver supports transmission distances up to 80 kilometers (approximately 49.71 miles) over single-mode optical fiber. This extended reach capability makes it suitable for metropolitan area network deployments and connections between geographically dispersed facilities without requiring intermediate signal regeneration equipment.
What type of fiber and connector does this transceiver require?
This transceiver is designed for use with single-mode optical fiber and features an LC duplex connector interface. Single-mode fiber provides optimal performance for long-distance transmissions with minimal signal loss, while the LC connector offers reliable, low-insertion-loss connections compatible with standard fiber optic patch panels and equipment.
What monitoring capabilities does this SFP module include?
This SFP transceiver features Digital Optical Monitoring (DOM), which provides real-time visibility into key optical parameters including transmit power, receive power, temperature, and supply voltage. This monitoring capability enables network administrators to proactively identify potential issues, optimize performance, and simplify troubleshooting in optical network deployments.
Is this transceiver compliant with government procurement requirements?
Yes, this SFP transceiver is TAA (Trade Agreements Act) compliant, making it eligible for procurement by U.S. government agencies, educational institutions, and other organizations subject to trade agreement regulations. The product is manufactured in the United States and United Kingdom, meeting the country-of-origin requirements for TAA compliance.
What is the operating wavelength of this DWDM SFP?
This transceiver operates at a precise 1547.72nm wavelength, which falls within the C-band spectrum commonly used in DWDM systems. This specific wavelength allows for channel planning in dense wavelength-division multiplexing deployments, enabling multiple optical signals to share the same fiber infrastructure without interference while maintaining signal integrity over long distances.
What type of network equipment is this transceiver compatible with?
This SFP transceiver is designed as a compatible module for Fujitsu network equipment platforms. As a standards-based 1000Base-DWDM SFP, it should work with any network switch, router, or media converter that supports the SFP form factor and 1000Base-DWDM specification, though compatibility should be verified with specific equipment manufacturers before deployment.
| Qty | Price | Available |
|---|
