Axiom A2984884-AX 4GB DDR3-1066 UDIMM RAM Module - 240-pin - PC3-8500 - for Dell Workstations
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Product Overview
The Axiom A2984884-AX is a 4GB DDR3-1066 UDIMM memory module engineered specifically for Dell workstation and desktop systems. This module delivers reliable performance with a 1066 MHz operating speed and PC3-8500 memory standard, making it a practical upgrade or direct replacement for compatible Dell models requiring DDR3 memory. Its unbuffered design ensures straightforward installation and system recognition without additional configuration overhead.
Built with DDR3 SDRAM technology, this RAM module supports efficient data transfer through 2-bit multiplexing from memory cells to I/O buses, which helps minimize processor idle time and enhances multitasking capability. The 240-pin UDIMM form factor conforms to standard desktop memory slot specifications, ensuring proper physical fit in supported Dell chassis. With a compact footprint and lightweight construction, this module facilitates easy integration into existing systems while maintaining compatibility with Dell's hardware validation requirements.
This memory solution targets users seeking to maintain or improve performance in legacy Dell workstations and desktops. The 4 GB capacity provides adequate memory for general computing tasks, light multitasking, and entry-level workstation applications without overwhelming older hardware architectures. Its Dell-specific compatibility reduces installation uncertainty and ensures reliable operation in the listed OptiPlex, Precision, and XPS models.
Technical Overview
This memory module operates at 1066 MHz with a DDR3-1066/PC3-8500 memory standard, providing a balanced combination of speed and stability for workstation applications. The DDR3 SDRAM interface delivers data transfer rates that support responsive system performance while maintaining compatibility with older DDR3 memory controllers. The module's 4 GB capacity is implemented using industry-standard memory chips arranged in a single-rank configuration suitable for desktop and workstation environments.
The technical architecture employs unbuffered design (UDIMM) without ECC or registered features, focusing on straightforward compatibility and cost-effective performance. This approach ensures the module works seamlessly with consumer and workstation systems that support standard unbuffered memory. The 240-pin configuration matches the physical and electrical requirements of DDR3 desktop memory slots, while the PC3-8500 designation confirms compliance with JEDEC standards for 1066 MHz operation.
Memory timing parameters are optimized for stability across the supported Dell systems, with the module automatically configuring to the system's required settings through SPD (Serial Presence Detect) data. This plug-and-play functionality eliminates manual configuration while ensuring reliable operation. The module's design prioritizes thermal management through standard DIMM dimensions that allow adequate airflow within Dell chassis, supporting sustained operation in workstation environments.
Key Product Advantages
This Axiom memory module offers several advantages for Dell workstation users seeking a reliable and compatible RAM upgrade.
Compatibility Assurance
Designed specifically for Dell workstations and desktops, including OptiPlex 780 SFF, DT, MT, Precision Workstation T1500, OptiPlex 380, XPS 730x, and XPS 8000 models. This targeted compatibility reduces installation uncertainty and ensures proper system recognition.
- Dell-specific design
- Tested for listed models
- Plug-and-play installation
Performance Enhancement
With 1066 MHz speed and DDR3 technology, this module helps improve system responsiveness and multitasking capability. The 4 GB capacity provides adequate memory for typical workstation tasks without overwhelming older systems.
- 1066 MHz operation
- DDR3 efficiency
- Balanced 4 GB capacity
Deployment / Use Cases
This memory module is ideal for upgrading or replacing RAM in compatible Dell workstations and desktop computers. It serves well in environments where reliable, specification-matched memory is needed for sustained operation.
Common use cases include office workstations, light CAD or design systems, general productivity computers, and legacy Dell desktop maintenance. The module supports single-module installations or can be paired with identical modules for dual-channel configurations where supported by the motherboard.
Relevant product facts for this section include Memory Size: 4 GB, Memory Technology: DDR3 SDRAM, Memory Speed: 1066 MHz, Number of Pins: 240-pin. When those details are considered together, they give buyers a clearer picture of how the product is equipped, how it connects, and what kind of day-to-day role it is meant to support.
Workstation Upgrades
Upgrade older Dell Precision or OptiPlex workstations to maintain performance for business applications, data entry, and light creative tasks.
System Maintenance
Replace failed memory modules in Dell desktops to restore system functionality without requiring complete hardware replacement.
Physical Profile
The module measures 5.25 inches (133.35 mm) in length, 1.18 inches (30 mm) in width, and has a thickness of 0.16 inches (4 mm). These dimensions conform precisely to standard DIMM specifications for desktop memory, ensuring compatibility with memory slots in supported Dell workstations and desktops. The compact form factor allows installation in various Dell chassis configurations without clearance issues, including small form factor (SFF) systems where space is constrained.
Weighing approximately 15.4 grams, the module maintains a lightweight profile that minimizes stress on motherboard memory slots during installation and operation. The physical design includes standard notch positioning for correct orientation and secure seating in 240-pin DDR3 slots. The module's construction utilizes a standard green PCB with clearly labeled memory chips and SPD chip, facilitating identification and verification during installation.
The dimensional consistency ensures this module can be paired with identical modules for dual-channel configurations where supported by the motherboard, maintaining uniform physical characteristics across memory banks. The slim 0.16-inch thickness allows adequate spacing between modules in multi-slot configurations, supporting proper airflow for thermal management in workstation environments. These physical attributes make the module suitable for both upgrade scenarios and replacement of failed modules in existing Dell systems.
- Width
- 1.18" (30 mm)
- Weight
- 15.4 g
- Length
- 5.25" (133.35 mm)
Highlights
- 4 GB DDR3 SDRAM memory capacity
- 1066 MHz operating speed with PC3-8500 standard
- 240-pin UDIMM form factor for desktop compatibility
- Designed for Dell workstations and desktops
- Compatible with OptiPlex, Precision, and XPS models
- DDR3 technology for efficient data transfer
- Compact dimensions: 5.25" x 1.18" x 0.16"
- Lightweight design at approximately 15.4 grams
- Lifetime limited warranty for long-term reliability
Specifications
| Specifications | |
|---|---|
| Manufacturer | Axiom Memory Solutions |
| Manufacturer Part Number | A2984884-AX |
| Brand Name | Axiom |
| Product Model | A2984884-AX |
| Product Name | 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 |
| Product Type | RAM Module |
| Technical Information | |
| Memory Size | 4 GB |
| Memory Technology | DDR3 SDRAM |
| Memory Speed | 1066 MHz |
| Memory Standard | DDR3-1066/PC3-8500 |
| Device Supported | Workstation |
| Physical Characteristics | |
| Number of Pins | 240-pin |
| Form Factor | UDIMM |
| Thickness | 0.16" (4 mm) |
| Width | 1.18" (30 mm) |
| Length | 5.25" (133.35 mm) |
| Weight (Approximate) | 15.4 g |
| Miscellaneous | |
| Compatibility | Dell - OptiPlex 780 SFF, DT, MT Dell - Precision Workstation T1500 Dell - OptiPlex 380 Dell - XPS 730x Dell - XPS 8000 |
| Warranty | |
| Limited Warranty | Lifetime |
FAQ
What processor does this product use?
Axiom 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 - For Workstation - 4 GB - DDR3-1066/PC3-8500 DDR3 SDRAM - 1066 MHz (A2984884-AX) is positioned around the processor configuration shown in the , giving buyers a clearer view of expected performance for business workloads and everyday deployment needs.
How much memory is installed?
It includes DDR3 SDRAM of memory to support responsive multitasking and daily workloads.
What storage is included?
Storage details for Axiom 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 - For Workstation - 4 GB - DDR3-1066/PC3-8500 DDR3 SDRAM - 1066 MHz (A2984884-AX) are intended to support operating system files, applications, and day-to-day business data while keeping the platform aligned with practical deployment expectations.
What graphics or display support is listed?
Display-related specifications help position Axiom 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 - For Workstation - 4 GB - DDR3-1066/PC3-8500 DDR3 SDRAM - 1066 MHz (A2984884-AX) for the kind of viewing experience, readability, and workspace fit buyers may expect in hardware & parts/components & hardware/ram modules deployments.
What connectivity options are available?
Connectivity details help confirm how Axiom 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 - For Workstation - 4 GB - DDR3-1066/PC3-8500 DDR3 SDRAM - 1066 MHz (A2984884-AX) can integrate with your network, accessories, and surrounding peripherals before rollout or replacement planning.
What operating system or platform is included?
Axiom 4GB DDR3-1066 UDIMM for Dell - A2984884, A2984885, A3414610 - For Workstation - 4 GB - DDR3-1066/PC3-8500 DDR3 SDRAM - 1066 MHz (A2984884-AX) is described for practical deployment use, and the specification set helps buyers confirm fit, compatibility, and expected day-to-day operation.
| Qty | Price | Available |
|---|
