Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
Black Box LHC015A-R3 Transceiver/Media Converter - 1x RJ-45 to 1x SC Duplex Single-mode Fiber - 40 km - Fast Ethernet - Rail/Rack-mountable
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This media converter operates at Fast Ethernet speeds, supporting 10/100Base-TX on the copper side and 100Base-FX on the fiber side. It uses 1310 nm wavelength single-mode fiber optics, which is standard for long-distance applications. The SC duplex connector interface ensures secure fiber connections, while the RJ-45 port accommodates standard Category 5 or better twisted pair cabling.
The converter's compact dimensions—0.80" height, 1.80" width, and 3.40" depth—make it space-efficient for dense installations. It is environmentally friendly and manufactured in Taiwan, with TAA compliance meeting U.S. government procurement requirements. A 6-year limited warranty provides long-term reliability assurance.
Key Product Advantages
The LHC015A-R3 extends network reach cost-effectively by converting copper to fiber, eliminating distance limitations and electrical interference common in twisted pair runs. Its single-mode fiber support enables deployments up to 40 kilometers, ideal for connecting remote locations without signal degradation.
Long-Distance Connectivity
Supports fiber runs up to 40 km, far exceeding the 100-meter limit of standard Ethernet cabling, for reliable data transmission over extended distances.
- 40 km maximum distance
- Single-mode fiber compatibility
- Reduced signal loss over long runs
Flexible Installation
Rail and rack-mountable design allows installation in various environments, from network racks to industrial control panels, saving space and simplifying deployment.
- Dual mounting options
- Compact form factor
- Easy integration into existing infrastructure
Regulatory Compliance
TAA compliant and environmentally friendly, meeting standards for government and enterprise procurement while supporting sustainable IT practices.
- TAA compliant for U.S. government use
- Environmentally friendly design
- 6-year warranty for reliability
Deployment / Use Cases
This media converter is ideal for extending network segments between buildings or across large facilities where direct copper connections are impractical. It converts existing twisted pair networks to fiber optic backbone links, enhancing performance and reliability in environments with electromagnetic interference or distance challenges.
Common applications include connecting remote offices to central data centers, linking industrial control systems across manufacturing floors, and integrating security cameras or access control systems over long distances. The rail-mountable option suits control panel installations in industrial settings, while the rack-mountable design fits standard network racks in IT closets.
Campus Network Extension
Connect multiple buildings within a campus using fiber infrastructure, ensuring high-speed data transfer and immunity to electrical noise over distances up to 40 km.
Industrial Networking
Deploy in manufacturing or utility environments to bridge copper-based devices like PLCs or sensors to fiber optic networks, supporting reliable communication in harsh conditions.
Physical Profile
The converter features a compact, durable enclosure measuring 0.80" (20.32 mm) in height, 1.80" (45.72 mm) in width, and 3.40" (86.36 mm) in depth. Its small size and lightweight design facilitate easy installation in space-constrained areas. The rail and rack-mountable form factor provides versatile mounting options, allowing integration into standard 19-inch racks or DIN rails commonly used in industrial and networking applications.
- Width
- 1.80" (45.72 mm)
- Depth
- 3.40" (86.36 mm)
- Height
- 0.80" (20.32 mm)
- Length
- 1310 nm
Highlights
- Converts 10/100Base-TX twisted pair to 100Base-FX single-mode fiber for extended network reach.
- Supports distances up to 40 kilometers using SC duplex fiber connectors.
- Compact, rail and rack-mountable design for flexible installation in various environments.
- Operates at Fast Ethernet speeds with data transfer rates up to 100 Mbps.
- Uses 1310 nm wavelength single-mode fiber optics for reliable long-distance transmission.
- TAA compliant and environmentally friendly, suitable for government and enterprise use.
- Includes a 6-year limited warranty for long-term reliability and support.
- Power supplied via AC adapter for straightforward deployment.
Specifications
| Specifications | |
|---|---|
| Manufacturer | Black Box Corporation |
| Manufacturer Part Number | LHC015A-R3 |
| Brand Name | Black Box |
| Product Model | LHC015A-R3 |
| Product Name | LHC015A-R3 Transceiver/Media Converter |
| Product Type | Transceiver/Media Converter |
| Interfaces/Ports | |
| Total Number of Ports | 2 |
| Network (RJ-45) | Yes |
| DVI | No |
| USB | No |
| Management Port | No |
| Number of Network (RJ-45) Ports | 1 |
| Number of SC Ports | 1 |
| SC Port Type | Duplex |
| Media & Performance | |
| Media Type Supported | Twisted Pair,Optical Fiber |
| Fiber Mode Supported | Single-mode |
| Fiber Optic Cable Wavelength | 1310 nm |
| Maximum Distance Supported | 40 km (24.85 Mile) |
| Network & Communication | |
| Ethernet Technology | Fast Ethernet |
| Network Technology | 10/100Base-TX,100Base-FX |
| Power Description | |
| Power Source | AC Adapter |
| Physical Characteristics | |
| Form Factor | Rail-mountable,Rack-mountable |
| Height | 0.80" (20.32 mm) |
| Width | 1.80" (45.72 mm) |
| Depth | 3.40" (86.36 mm) |
| Miscellaneous | |
| Environmentally Friendly | Yes |
| Country of Origin | Taiwan |
| TAA Compliant | Yes |
| Warranty | |
| Limited Warranty | 6 Year |
User Manual
FAQ
What types of media does this converter support?
The converter supports twisted pair copper cabling (e.g., Cat5e) on the RJ-45 port and single-mode optical fiber on the SC duplex port. It converts between these media types, enabling connectivity between copper-based network devices and fiber optic infrastructure.
What is the maximum distance supported by this media converter?
It supports a maximum distance of 40 kilometers (24.85 miles) over single-mode fiber. On the twisted pair side, standard Ethernet distance limits apply, typically up to 100 meters for reliable operation.
What network speeds does this converter handle?
The converter handles Fast Ethernet speeds, supporting 10/100Base-TX on the copper side and 100Base-FX on the fiber side. This provides data transfer rates up to 100 Mbps, suitable for typical office or industrial network traffic.
How is this converter powered and installed?
It is powered by an included AC adapter. For installation, the compact design supports both rail-mounting (e.g., on DIN rails) and rack-mounting in standard 19-inch racks, offering flexibility for network closets, server rooms, or industrial control panels.
Is this converter compliant with government procurement standards?
Yes, it is TAA (Trade Agreements Act) compliant, making it suitable for U.S. government procurement. It is also environmentally friendly and comes with a 6-year limited warranty for added reliability assurance.
What type of fiber connector does this converter use?
It uses an SC duplex connector for the fiber interface. This connector type is common in single-mode fiber applications, providing a secure and reliable connection for data transmission over long distances.
| Qty | Price | Available |
|---|
