sale
Sold out
Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
Cisco MDS 9148T Fibre Channel Switch - 48 Ports - 32 Gbit/s - 24 Fiber Channel Ports - 24 x Total Expansion Slots - SFP+ - 24 x SFP+ - (DS-C9148T-24PETK9)
SKU:
DS-C9148T-24PETK9
UPC:
889728163132
(No reviews)
Write a Review
Write a Review
Cisco
Cisco MDS 9148T Fibre Channel Switch - 48 Ports - 32 Gbit/s - 24 Fiber Channel Ports - 24 x Total Expansion Slots - SFP+ - 24 x SFP+ - (DS-C9148T-24PETK9)
MSRP:
$46,750.03
$46,750.03
$16,662.99
Save:
$30,087.04 (64.36%)
Warranty Information:
Covered by Manufacturer
Condition:
New
Width:
43.94
(cm)
Height:
4.37
(cm)
Depth:
56.64
(cm)
B2B Pricing
Business volume discounts
IT Experts
Technical guidance
IT Configuration
Preparation & staging
Canada Stock
QC · ON · AB · BC
Product Features
Description
[custom-highlights][/custom-highlights]
Additional-pdf1
Total Number of Ports: 48
Number of Active Ports: 24
Number of Fibre Channel Ports: 24
Data Transfer Rate: 32 Gbit/s
Total Number of Expansion Slots: 24
Expansion Slot Type: SFP+
Number of SFP+ Slots: 24
Manageable: Yes
Plug/Connector Type: C15/C14
Maximum Power Supply Wattage: 650 W
Redundant Power Supply: Yes
Compatible Rack Unit: 1U
Form Factor: Rack-mountable
Height: 1.72" (43.69 mm)
Width: 17.30" (439.42 mm)
Depth: 22.30" (566.42 mm)
Weight (Approximate): 18.74 lb (8500 g)
- High performance:
- MDS 9148T architecture, with centralized nonblocking arbitration, provides consistent 32-Gbps low-latency performance across all traffic conditions for every Fibre Channel port on the switch.
- Fully integrated SAN analytics:
- This feature-rich switch also offers state-of-the-art SAN analytics and telemetry capabilities that have been built into this next-generation hardware platform. This new state-of-art technology couples the next-generation port ASIC with a fully dedicated Network Processing Unit designed to complete analytics calculations in real time on the 32-Gbps line card. The telemetry data extracted from the inspection of the frame headers are calculated on board (within the switch) and, using an industry-leading open format, can be streamed to any analytics-visualization platform.
- Capital Expenditures (CapEx) savings:
- The 32-Gbps ports allow users to deploy them with existing 16- or 8-Gbps transceivers provide investment protection with an option to upgrade to 32-Gbps transceivers and adapters whenever needed.
- High availability:
- MDS 9148V switches is designed to provide 99.999% availability. It provides such outstanding availability and reliability by providing redundancy on all major components, such as the power supply and cooling subsystems. Dual power supplies also facilitate redundant power grids. In addition, port-channel link members can be striped across the three 16-port port groups, thus providing additional high availability.
- Reliability:
- As part of the standard 32-Gbps Fibre Channel specification, Cisco provides FEC between switch ports and HBA ports on all 32-Gbps Fibre Channel fixed switches. This feature helps ensure any error introduced in flight gets corrected before it reaches the device side. In addition, Cisco extends Buffer-to-Buffer State Change Notification (BBSCN) and buffer-to-buffer credit recovery, which is supported on all Cisco switches between ISL ports, to the fabric ports attached to any end device. Over time, the corruption of receiver-ready messages, known as R_RDY primitives, can lead to a loss of credits, which can eventually cause a link to stop transmitting in one direction. Buffer-to-buffer credit recovery provides for two attached ports to detect and correct this situation.
- Growth in small increments:
- The MDS 9148T Fibre Channel switch provides an option to deploy as few as twenty-four 32-Gbps Fibre Channel ports in the entry-level variant, which can grow in increments of 8 ports to up to 48 ports. This setup allows four possible configurations of 24, 32, 40, and 48 ports.
- Next-generation ASIC:
- The MDS 9148T Fibre Channel switch is powered by the same high-performance 32-Gbps Cisco ASIC that powers the Cisco MDS 32-Gbps Fibre Channel product portfolio.
- Higher scalability:
- Increased fabric scalability provides more flexibility for a variety of SAN architectures.
- Telemetry:
- Fibre Channel and Small Computer System Interface (SCSI) headers can be inspected without the need for any external taps or appliances. The resulting metrics can be analyzed on the switch and also exported using a dedicated 1- or 10-Gbps Small Form-Factor Pluggable Plus (SFP+) port for telemetry and analytics purposes#.
- Intelligent services:
- Auto-zone, Smart Zoning, slow-drain detection and isolation, Virtual SAN (VSAN) and Inter-VSAN routing (IVR), and fabricwide Quality of Service (QoS) enable migration from SAN islands to enterprise.wide storage networks. Traffic encryption is optionally available to meet stringe
[custom-specifications]
| Specifications | |
| Manufacturer | Cisco Systems, Inc |
| Manufacturer Part Number | DS-C9148T-24PETK9 |
| Manufacturer Website Address | http://www.cisco.com |
| Brand Name | Cisco |
| Product Series | MDS 9100 |
| Product Model | 9148T |
| Product Name | MDS 9148T Fibre Channel Switch |
| Product Type | Fibre Channel Switch |
| Interfaces/Ports | |
| Total Number of Ports | 48 |
| Number of Active Ports | 24 |
| Number of Fibre Channel Ports | 24 |
| Media & Performance | |
| Data Transfer Rate | 32 Gbit/s |
| I/O Expansions | |
| Total Number of Expansion Slots | 24 |
| Expansion Slot Type | SFP+ |
| Number of SFP+ Slots | 24 |
| Management & Protocols | |
| Manageable | Yes |
| Power Description | |
| Plug/Connector Type | C15/C14 |
| Maximum Power Supply Wattage | 650 W |
| Redundant Power Supply | Yes |
| Physical Characteristics | |
| Compatible Rack Unit | 1U |
| Form Factor | Rack-mountable |
| Height | 1.72" (43.69 mm) |
| Width | 17.30" (439.42 mm) |
| Depth | 22.30" (566.42 mm) |
| Weight (Approximate) | 18.74 lb (8500 g) |
[/custom-specifications]
[custom-user-manual]
Available Documentation:
Additional-pdf1
[/custom-user-manual]
Volume Discounts
| Qty | Price | Available |
|---|
Cisco MDS 9148T Fibre Channel Switch - 48 Ports - 32 Gbit/s - 24 Fiber Channel Ports - 24 x Total Expansion Slots - SFP+ - 24 x SFP+ - (DS-C9148T-24PETK9)
MSRP:
$46,750.03
$46,750.03
$16,662.99
Save:
$30,087.04 (64.36%)
Out of stock
