Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
Perle 05090710 S-1110-XT Industrial Temperature Media Converter - 10/100/1000 to Fiber - 1 RJ-45 & 1 ST Port - Single-mode up to 10 km
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This media converter features a 10/100/1000Base-T RJ-45 port for copper connectivity and a duplex ST port for single-mode fiber optic connections. It supports Gigabit Ethernet technology, ensuring data transfer rates up to 1000 Mbps over fiber. The maximum supported distance is 10 kilometers, allowing network segments to span longer ranges without signal repeaters or amplifiers.
The converter operates on single-mode fiber, which is ideal for long-distance transmissions with minimal signal loss. It automatically negotiates speed and duplex settings on the copper side, while the fiber interface maintains stable light transmission for consistent data integrity. The device requires no management interface, offering a plug-and-play setup that simplifies deployment in both new and existing network infrastructures.
Key Product Advantages
The S-1110-XT media converter excels in environments where reliability and distance are critical. Its industrial temperature rating ensures stable operation across a wide range of conditions, from freezing cold to intense heat, without performance degradation. This robustness makes it a dependable choice for outdoor cabinets, factory floors, and remote sites where standard converters might fail.
By converting copper to fiber, this device extends network reach far beyond the 100-meter limit of Cat5e/Cat6 cables. It also enhances signal quality by isolating electrical noise and ground loop issues common in industrial settings. The fiber optic link provides inherent security against eavesdropping and reduces the risk of data corruption from electromagnetic interference.
Extended Reach
Enables network segments up to 10 km using single-mode fiber, eliminating the need for additional switches or repeaters in long-distance deployments.
- 10 km maximum distance
- Single-mode fiber support
- No signal degradation over fiber
Industrial Durability
Built to withstand temperature extremes and harsh environments, ensuring continuous operation in challenging conditions like manufacturing plants or outdoor installations.
- Industrial temperature rated
- Rugged construction
- Reliable in EMI-heavy areas
Deployment / Use Cases
This media converter is ideal for extending Ethernet networks across campuses, between buildings, or along production lines where copper cabling is impractical. It connects existing RJ-45 equipment to fiber backbones, allowing organizations to leverage fiber's distance and noise immunity without replacing entire network infrastructures. Common deployments include linking security cameras, access control systems, and industrial automation devices over long ranges.
In industrial settings, the S-1110-XT connects PLCs, sensors, and HMIs across factory floors or outdoor areas where electrical interference can disrupt copper signals. It also serves in telecommunications for connecting remote cabinets or cell sites to central offices. The rail, rack, and wall-mount options provide flexible installation in control panels, server rooms, or outdoor enclosures, adapting to space constraints and environmental needs.
Building-to-Building Links
Connect networks between separate structures using underground or aerial fiber runs, avoiding lightning strikes and ground potential differences that affect copper cables.
Industrial Automation
Integrate machinery and control systems in manufacturing plants, where fiber optic immunity to EMI ensures reliable communication between devices on noisy factory floors.
Physical Profile
The S-1110-XT has a compact footprint measuring 1" (25.40 mm) in height, 3.10" (78.74 mm) in width, and 4.70" (119.38 mm) in depth, with a weight of approximately 317.5 grams. Its small form factor allows dense installations in racks or panels, while the lightweight design simplifies handling during deployment. The converter supports rail, rack, and wall mounting, offering versatile placement options for both centralized and distributed network setups.
- Width
- 3.10" (78.74 mm)
- Depth
- 4.70" (119.38 mm)
- Height
- 1" (25.40 mm)
- Weight
- 317.5 g
Highlights
- Converts 10/100/1000Base-T copper Ethernet to single-mode fiber optic
- Supports distances up to 10 km for extended network reach
- Industrial temperature rating for reliable operation in harsh environments
- 1 RJ-45 port and 1 duplex ST port for flexible connectivity
- Gigabit Ethernet performance with up to 1000 Mbps data rates
- Rail, rack, and wall-mountable form factor for versatile installation
- Plug-and-play operation with no management required
- Lifetime warranty for long-term reliability assurance
- Environmentally compliant with RoHS, REACH, and WEEE standards
- Made in Canada with durable construction
Specifications
| Specifications | |
|---|---|
| Manufacturer | Perle Systems, Inc |
| Manufacturer Part Number | 05090710 |
| Brand Name | Perle |
| Product Model | S-1110-S2ST10-XT |
| Product Name | S-1110-XT 10/100/1000 to Fiber Industrial Temperature Media Converter |
| Product Type | Transceiver/Media Converter |
| Interfaces/Ports | |
| Total Number of Ports | 2 |
| Network (RJ-45) | Yes |
| DVI | No |
| USB | No |
| Management Port | No |
| Number of Network (RJ-45) Ports | 1 |
| Number of ST Ports | 1 |
| ST Port Type | Duplex |
| Media & Performance | |
| Media Type Supported | Twisted Pair,Optical Fiber |
| Fiber Mode Supported | Single-mode |
| Maximum Distance Supported | 10 km |
| Network & Communication | |
| Ethernet Technology | Gigabit Ethernet |
| Network Technology | 10/100/1000Base-T,1000Base-LX/LH |
| Physical Characteristics | |
| Form Factor | Rail-mountable,Rack-mountable,Wall Mountable |
| Height | 1" (25.40 mm) |
| Width | 3.10" (78.74 mm) |
| Depth | 4.70" (119.38 mm) |
| Weight (Approximate) | 317.5 g |
| Miscellaneous | |
| Environmentally Friendly | Yes |
| Environmental Compliance | Registration, Evaluation, Authorization and Restriction of Chemicals (REACH),Restriction of Hazardous Substances (RoHS),Waste Electrical and Electronic Equipment Directive (WEEE) |
| Country of Origin | Canada |
| Warranty | |
| Limited Warranty | Lifetime |
FAQ
What does this media converter do?
The Perle S-1110-XT converts 10/100/1000Base-T Ethernet signals from copper twisted pair cables to fiber optic signals. It allows you to extend your network beyond the 100-meter limit of copper by using single-mode fiber, supporting distances up to 10 kilometers while maintaining Gigabit Ethernet speeds.
What types of fiber does it support?
This converter supports single-mode fiber optic cables. Single-mode fiber is designed for long-distance transmissions, typically used in applications requiring spans of several kilometers. It uses a duplex ST connector interface, ensuring proper alignment and stable light transmission for reliable data transfer.
How far can it transmit data over fiber?
The maximum supported distance is 10 kilometers (approximately 6.2 miles) over single-mode fiber. This extended reach makes it suitable for connecting buildings across campuses, linking remote industrial sites, or extending network segments in large facilities without signal degradation.
What is the industrial temperature rating?
The S-1110-XT is rated for industrial temperature operation, meaning it can function reliably in environments with extreme temperature variations. This ensures consistent performance in harsh conditions such as outdoor enclosures, factory floors, or unheated spaces where standard converters might fail.
How is this converter powered?
Power details are not specified in product details. Typically, media converters like this use an external power adapter or PoE, but for exact power requirements, refer to the product documentation or manufacturer specifications to ensure compatibility with your installation's power setup.
What mounting options are available?
This converter supports rail-mountable, rack-mountable, and wall-mountable installations. The compact design allows it to fit in standard 19-inch racks, DIN rails in industrial panels, or direct wall mounting, providing flexibility for various deployment scenarios in server rooms, control cabinets, or remote locations.
| Qty | Price | Available |
|---|
