StarTech. com NLRD-50F-CAT6A-PATCH Cat6a Ethernet Cable - 50ft Red - Shielded S/FTP - Snagless RJ45 - 10G - 100W PoE++ - LSZH - 27AWG Pure Copper
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This Cat6a cable operates at frequencies up to 500MHz with low near-end crosstalk (NEXT) and return loss characteristics, ensuring reliable performance in 10GBASE-T network environments. The cable features four twisted pairs with eight conductors, providing the necessary infrastructure for high-speed data transmission.
The aluminum mylar foil with tinned copper braid shielding offers comprehensive EMI protection, while the stranded copper construction maintains flexibility for routing through tight spaces. Each cable is individually tested to meet ANSI/TIA-568.2-D standards and comes with ETL verification for guaranteed Cat6a performance.
This section brings together practical product details such as Cable Type, Cable Characteristic, Cable Length, Color Family, so buyers can judge configuration, deployment fit, and day-to-day suitability with less guesswork.
Key Product Advantages
This Ethernet cable combines premium materials with thoughtful engineering to deliver consistent performance in professional networking applications. The comprehensive shielding and quality construction provide advantages that extend beyond basic connectivity requirements.
Enhanced Signal Integrity
S/FTP shielding with aluminum mylar foil and tinned copper braid minimizes electromagnetic interference, maintaining clean signal transmission even in electrically noisy environments.
- Reduces EMI/RFI interference
- Maintains signal quality over 50ft distance
- Supports 10Gbps speeds at full length
Safety-First Design
The LSZH (Low Smoke Zero Halogen) jacket emits minimal toxic fumes if combusted, making this cable suitable for enclosed spaces, riser applications, and areas with limited ventilation.
- Reduced toxic emission risk
- Compliant with safety standards
- Suitable for plenum spaces
Durable Connectivity
Gold-plated RJ45 connectors with snagless boots provide reliable mating cycles while preventing accidental disconnection in crowded patch panels and network equipment.
- 50-micron gold plating
- Strain relief design
- Wear-resistant construction
Deployment / Use Cases
This Cat6a patch cable is ideal for connecting network equipment in data centers, office environments, and industrial settings where reliable high-speed connectivity is essential. The 50-foot length provides flexibility for routing between equipment racks, across rooms, or through cable management systems.
The cable supports Power over Ethernet++ (PoE++) up to 100W, making it suitable for connecting powered devices such as IP cameras, wireless access points, VoIP phones, and other network equipment that require both data and power over a single cable.
Data Center Applications
Connect switches, servers, and storage devices in rack-to-rack or within-rack configurations where 10Gbps performance and reliable PoE delivery are required.
PoE Device Connectivity
Power and connect IEEE 802.3bt Type 4 compliant devices including high-power access points, pan-tilt-zoom cameras, and digital signage displays.
Highlights
- 50-foot Category 6a Ethernet patch cable with 10Gbps data transfer capability
- Supports Power over Ethernet++ (PoE++) up to 100W for connected devices
- S/FTP shielding with aluminum mylar foil and tinned copper braid for EMI protection
- LSZH (Low Smoke Zero Halogen) jacket for enhanced safety in enclosed spaces
- Snagless RJ45 connectors with 50-micron gold plating for reliable connections
- 27AWG pure bare copper conductors maintain consistent electrical characteristics
- Individually tested to meet ANSI/TIA-568.2-D standards with ETL verification
- Bright red color for easy identification in cable management systems
- Compliant with RoHS and WEEE environmental directives
- Lifetime limited warranty for long-term reliability assurance
Specifications
| Specifications | |
|---|---|
| Manufacturer | StarTech.com |
| Manufacturer Part Number | NLRD-50F-CAT6A-PATCH |
| Brand Name | StarTech.com |
| Product Name | Cat6a Ethernet Cable - LSZH |
| Packaged Quantity | 1 |
| Product Type | Network Cable |
| Technical Information | |
| Cable Type | Category 6a |
| Cable Characteristic | Patch Cable |
| Cable Length | 50 ft (15.24 m) |
| Connector Type on First End | RJ-45 Network - Male |
| Connector Gender on First End | Male |
| Connector on First End Details | 1 x RJ-45 Network - Male |
| Connector Type on Second End | RJ-45 Network - Male |
| Connector Gender on Second End | Male |
| Connector on Second End Details | 1 x RJ-45 Network - Male |
| Connector Plating | Gold |
| Shielding | Yes |
| Jacket Type | LSZH |
| Device Supported | Network Device,Switch,Module,PoE Device,PoE Switch,Access Point,IP Camera,NAS |
| American Wire Gauge | 27 AWG |
| Data Transfer Rate | 10 Gbit/s |
| Boot Type | Snagless |
| Number of Pairs | 4 |
| Number of Conductors | 8 |
| Features | PoE++,Shielded with Foiled Twisted Pair (S/FTP),Strain Relief,Braided,EMI Protection,Wear Resistant,Flexible,Flame Retardant,Durable,Passive,Stranded,Auto Low Latency Mode (ALLM),Near End Cross Talk (NEXT) |
| Physical Characteristics | |
| Color Family | Red |
| Product Color | Red |
| Product Material | Copper |
| Shielding Material | Aluminum Mylar Foil,Tinned Copper Braid |
| Miscellaneous | |
| Environmental Compliance | Restriction of Hazardous Substances (RoHS),Waste Electrical and Electronic Equipment Directive (WEEE) |
| Warranty | |
| Limited Warranty | Lifetime |
User Manual
FAQ
What is the maximum data transfer speed supported by this Cat6a cable?
This StarTech.com Cat6a Ethernet cable supports data transfer rates up to 10 Gbps (10 Gigabits per second). It's designed for 10GBASE-T network deployments and maintains this performance across the full 50-foot length when used with compatible network equipment. The cable operates at frequencies up to 500MHz with optimized near-end crosstalk characteristics to ensure reliable high-speed data transmission.
Does this cable support Power over Ethernet (PoE) devices?
Yes, this cable supports Power over Ethernet++ (PoE++) up to 100W, compliant with IEEE 802.3bt Type 4 specifications. It can deliver both data and power to connected devices such as IP cameras, wireless access points, VoIP phones, and other network equipment. The 27AWG pure copper conductors and robust construction ensure stable power delivery alongside high-speed data transmission.
What type of shielding does this Ethernet cable have?
This cable features S/FTP (Shielded with Foiled Twisted Pair) shielding, which includes aluminum mylar foil with tinned copper braid. This dual-layer shielding provides comprehensive protection against electromagnetic interference (EMI) and radio frequency interference (RFI), maintaining signal integrity in electrically noisy environments. The shielding is particularly important for maintaining 10Gbps performance over the 50-foot length.
What does LSZH jacket mean and why is it important?
LSZH stands for Low Smoke Zero Halogen, referring to the cable's jacket material that emits minimal smoke and no halogenated gases if combusted. This is important for safety in enclosed spaces, poorly ventilated areas, and plenum applications where toxic fumes could pose health risks. The LSZH jacket makes this cable suitable for data centers, office buildings, and industrial environments where fire safety is a concern.
What devices are compatible with this Cat6a patch cable?
This cable is compatible with network devices including switches, routers, servers, NAS devices, PoE switches, access points, IP cameras, and other Ethernet-enabled equipment. It supports Category 6a, 6, and 5e standards, providing backward compatibility with existing network infrastructure while delivering enhanced performance for 10Gbps deployments.
Is this cable individually tested for performance?
Yes, each StarTech.com NLRD-50F-CAT6A-PATCH cable is individually tested to meet ANSI/TIA-568.2-D standards for Category 6a performance. The testing includes verification of impedance, attenuation, near-end crosstalk, and return loss characteristics. Each cable comes with ETL verification, ensuring it delivers the specified 10Gbps performance and PoE++ capability across the entire 50-foot length.
| Qty | Price | Available |
|---|
