Shipping included*
Exclusions
Additional shipping fees may apply in rare circumstances for deliveries outside standard service areas. In most cases, this only potentially affects shipments to the Northwest Territories and Yukon, as well as certain heavy or oversized items.
Perle 05079744 S-1110DHP-SC120 Media Converter - 2x RJ-45 + 1x SC Duplex - Single-mode 1550 nm Fiber - 120 km - PoE PSE up to 100W
Business volume discounts
Technical guidance
Preparation & staging
QC · ON · AB · BC
Product Features
Technical Overview
This media converter operates at Gigabit Ethernet speeds across both copper and fiber interfaces, supporting 1000Base-ZX for fiber connections and 10/100/1000Base-T for copper connections. The single-mode fiber interface uses 1550 nm wavelength for optimal long-distance transmission with minimal signal loss over extended fiber runs.
Advanced management features include PD Reset for remote power cycling of connected devices, Fiber Redundancy for network resilience, Smart Link Pass-Through for seamless network integration, Fiber Fault Alert for proactive monitoring, Auto-MDIX for simplified cable connections, and Loopback for diagnostic testing. These capabilities ensure reliable operation and simplified troubleshooting in complex network environments.
This section brings together practical product details such as Total Number of Ports, Network (RJ-45), Number of Network (RJ-45) Ports, Media Type Supported, so buyers can judge configuration, deployment fit, and day-to-day suitability with less guesswork.
Key Product Advantages
The S-1110DHP-SC120 combines extended fiber reach with robust power delivery in a single compact unit, eliminating the need for separate power injectors and media converters in remote deployment scenarios. This integration reduces equipment costs, simplifies cabling, and minimizes potential failure points in network infrastructure.
High-Power PoE Delivery
Supplies IEEE 802.3bt Hi-PoE PSE power up to 100W, compatible with IEEE 802.3af PoE and IEEE 802.3at PoE+ devices for versatile device support.
- Powers high-demand devices
- Backward compatible with older PoE standards
- Eliminates separate power injectors
Extended Fiber Connectivity
Supports single-mode fiber connections up to 120 kilometers, enabling network extension beyond copper limitations while maintaining Gigabit performance.
- 120 km maximum distance
- 1550 nm wavelength
- SC duplex connector
Flexible Deployment Options
Features rack-mountable, rail-mountable, wall-mountable, and standalone form factors with compact dimensions for installation in various environments.
- Multiple mounting options
- Compact footprint
- Versatile placement
Deployment / Use Cases
This media converter is ideal for extending network infrastructure between buildings, across campuses, or along industrial facilities where copper cable distance limitations would otherwise require additional networking equipment. The combination of fiber extension and high-power PoE delivery makes it particularly valuable for powering remote network devices while maintaining network connectivity over long distances.
Common deployment scenarios include connecting remote security cameras with PoE requirements across large properties, extending network access to outdoor wireless access points in campus environments, linking separate buildings within industrial complexes, and providing network connectivity to remote kiosks or digital signage installations. The unit's compatibility with various PoE standards ensures it can power both legacy and modern network devices without requiring infrastructure upgrades.
Physical Profile
The compact design measures 1.02" (26 mm) in height, 5.91" (150 mm) in width, and 3.74" (95 mm) in depth, with an approximate weight of 14.11 oz (400 g). This small footprint allows for dense installations in rack environments or discreet placement in space-constrained locations. The unit supports multiple mounting configurations including standard rack mounting, DIN rail attachment for industrial environments, wall mounting for facility installations, and standalone operation for temporary or desktop deployments.
- Width
- 5.91" (150 mm)
- Depth
- 3.74" (95 mm)
- Height
- 1.02" (26 mm)
- Weight
- 14.11 oz (400 g)
- Length
- 1550 nm
Highlights
- Converts 10/100/1000Base-T to 100/1000Base-X fiber signals
- Dual RJ-45 ports plus one SC duplex fiber port
- Supplies IEEE 802.3bt Hi-PoE PSE power up to 100W
- Compatible with IEEE 802.3af PoE and IEEE 802.3at PoE+ devices
- Supports single-mode fiber with 1550 nm wavelength
- Maximum distance of 120 km (74.56 miles)
- Advanced features: PD Reset, Fiber Redundancy, Smart Link Pass-Through
- Additional features: Fiber Fault Alert, Auto-MDIX, Loopback
- Rack-mountable, rail-mountable, wall-mountable, and standalone form factors
- Lifetime limited warranty with Canadian origin
Specifications
| Specifications | |
|---|---|
| Manufacturer | Perle Systems, Inc |
| Manufacturer Part Number | 05079744 |
| Brand Name | Perle |
| Product Series | S-1110HP |
| Product Model | S-1110DHP-SC120 |
| Product Name | S-1110DHP-SC120 Transceiver/Media Converter |
| Product Type | Transceiver/Media Converter |
| Interfaces/Ports | |
| Total Number of Ports | 3 |
| Network (RJ-45) | Yes |
| Number of Network (RJ-45) Ports | 2 |
| Number of SC Ports | 1 |
| SC Port Type | Duplex |
| Media & Performance | |
| Media Type Supported | Twisted Pair,Optical Fiber |
| Fiber Mode Supported | Single-mode |
| Fiber Optic Cable Wavelength | 1550 nm |
| Maximum Distance Supported | 120 km (74.56 Mile) |
| Network & Communication | |
| Ethernet Technology | Gigabit Ethernet |
| Network Technology | 1000Base-ZX,10/100/1000Base-T |
| Physical Characteristics | |
| Form Factor | Rack-mountable,Rail-mountable,Wall Mountable,Standalone |
| Height | 1.02" (26 mm) |
| Width | 5.91" (150 mm) |
| Depth | 3.74" (95 mm) |
| Weight (Approximate) | 14.11 oz (400 g) |
| Miscellaneous | |
| Environmentally Friendly | Yes |
| Environmental Compliance | Waste Electrical and Electronic Equipment Directive (WEEE),Registration, Evaluation, Authorization and Restriction of Chemicals (REACH),Restriction of Hazardous Substances (RoHS) |
| Country of Origin | Canada |
| Warranty | |
| Limited Warranty | Lifetime |
FAQ
What types of connections does this media converter support?
The Perle S-1110DHP-SC120 supports two RJ-45 ports for copper Ethernet connections (10/100/1000Base-T) and one SC duplex port for single-mode fiber connections (100/1000Base-X). This allows conversion between copper and fiber network segments while maintaining Gigabit Ethernet performance across both media types.
How far can this converter extend my network over fiber?
This media converter supports fiber connections up to 120 kilometers (approximately 74.56 miles) when using single-mode fiber with 1550 nm wavelength. This extended reach makes it suitable for connecting network segments across large campuses, between separate buildings, or along extensive industrial facilities where copper cable distance limitations would otherwise require additional networking equipment.
What PoE standards does this converter support?
The converter supplies IEEE 802.3bt Hi-PoE PSE power up to 100W and is compatible with IEEE 802.3af PoE and IEEE 802.3at PoE+ devices. This means it can power a wide range of network equipment from legacy PoE devices to modern high-power requirements, eliminating the need for separate power injectors in remote installation scenarios.
What advanced management features are included?
Advanced features include PD Reset for remote power cycling of connected devices, Fiber Redundancy for network resilience, Smart Link Pass-Through for seamless network integration, Fiber Fault Alert for proactive monitoring of fiber connections, Auto-MDIX for simplified cable connections without worrying about straight-through or crossover cables, and Loopback for diagnostic testing and troubleshooting network issues.
How can this converter be mounted or installed?
The converter offers multiple installation options including rack-mountable, rail-mountable, wall-mountable, and standalone form factors. With compact dimensions of 1.02" height × 5.91" width × 3.74" depth and approximate weight of 14.11 oz, it fits easily in standard rack enclosures, attaches to DIN rails in industrial settings, mounts to walls in facility installations, or operates independently on desktops for temporary deployments.
What environmental and warranty provisions apply to this product?
The converter is environmentally friendly and complies with WEEE, REACH, and RoHS directives. It carries a lifetime limited warranty and is manufactured in Canada, providing long-term reliability assurance and regulatory compliance for deployment in various regions and industries with strict environmental requirements.
| Qty | Price | Available |
|---|
