Bosch B444-A Plug-in cell module, AMEC LTE - For Alarm Communicator, Fire Alarm Control Panel (B444-A)

Marketing Information: The cellular communicator enables secure two-way IP communication over the AT&T cellular network by plugging into a compatible Bosch control panel or communicator interface.

• Alarm reporting to a central station
• Remote control panel programming through RPS with supported control panels
• Remote monitoring and control through a mobile application with supported control panels
• Personal notifications for compatible control panels

Device Supported:
• Alarm Communicator
• Fire Alarm Control Panel

Features: LED Indicator
Input Voltage: 12 V DC
Height: 0.60" (15.24 mm)
Package Contents:
• B444-A Plug-in cell module, AMEC LTE
• 2 Antennas
• 1 Literature pack

Additional Information: Conettix IP communication via cellular

In addition to the security provided by the network operator, the cellular communicator uses our Conettix IP protocol that supports:


• Flexible polling intervals
• Resistance to Denial of Service attacks
• 128-bit to 256-bit AES encryption with Cypher Block Chaining
• Anti-replay/anti-substitution keys
Easy installation, troubleshooting, and maintenance


• No networking expertise required at field site (no firewall or router settings)
• Signal strength and diagnostics available through keypad and Remote Programing Software (RPS)
• Diagnostic LEDs for on-site troubleshooting
SMA antenna connections

Each module uses a two-port antenna connection and uses two SMA antennas to maximize cellular communications.



Remote programming of Bosch control panels

The cellular communicator supports secure RPS programming of compatible Bosch control panels


Remote Connect Programming Service support

Remote Connect Programming Service enables a secure control panel connection to RPS using Bosch Cloud services. The service allows a secure TLS connection to a control panel without specific port and router settings and without a static IP or DNS.

Personal notification and control

The cellular communicator supports the Bosch Remote Security Control mobile application and can be configured for personal notification reports to mobile phones or e-mail addresses.



Compatibility:
• B9512G/B9512G-E, B8512G/B8512G-E
• B6512/B5512/B4512/B3512, B5512E/ B4512E/B3512E control panel with firmware v3.09 or higher (direct insertion)
• The module is compatible with most Bosch control panels when used with a B450 Conettix Plug-in Communicator Interface with firmware v3.09 or higher. Refer to the B450 datasheet for complete control panel compatibility listings.
• B465 Conettix Universal Dual Path Communicator with firmware v2.09 or higher.
• B40-P, B40-MB25, B40-MB50 auxiliary indoor/ outdoor antennas

Certifications & Standards: USA

• UL CP-01-2010 Control Panel Standard -Features for False Alarm Reduction
• UL UL 864 - Standard for Control Units and Accessories for Fire Alarm Systems (10th edition)
• UL UL 1076 - Proprietary Burglar Alarm Units and Systems
• UL UL 1610 - Central Station Burglar Alarm Units
• UL UL 365 - Police Station Connected Bur- glar Alarm Units
• UL UL 609 - Standard for Local Burglar Alarm Units and Systems
• UL UL 636 - Holdup Alarm Units and Sys- tems
• UL UL 985 - Household Fire Warning Sys- tem Units (6th edition)
• UL UL 1023 - Household Burglar Alarm Sys- tem Units
• UL UL 1635 - Standard for Digital Alarm Communicator System Units
• FCC Part 15 Class B
Canada
• ULC Underwriters Laboratories of Canada S1871-20121210
• ULC ULC-ORD C1023 - Household Burglar Alarm System Units
• ULC ULC-ORD C1076 - Proprietary Burglar Alarm Units and Systems
• ULC CAN/ULC S303 - Local Burglar Alarm Units and Systems
• ULC CAN/ULC S304 - Standard for Signal Re- ceiving Center and Premise Burglar Alarm
• ULC CAN/ULC S545 - Residential Fire Warn- ing System Control Units
• ULC CAN/ULC S559 - Fire Signal Receiving Centres and Systems
• ICES-003 - Information Technology Equipment (ITE)
UL UL 864 - Standard for Control Units and
Accessories for Fire Alarm Systems
(10th edition)
UL UL 1076 - Proprietary Burglar Alarm
Units and Systems
UL UL 1610 - Central Station Burglar Alarm
Units
UL UL 365 - Police Station Connected Bur-
glar Alarm Units
UL UL 609 - Standard for Local Burglar
Alarm Units and Systems
UL UL 636 - Holdup Alarm Units and Sys-
tems
UL UL 985 - Household Fire Warning Sys-
tem Units (6th edition)
UL UL 1023 - Household Burglar Alarm Sys-
tem Units
UL UL 1635 - Standard for Digital Alarm
Communicator System Units
FCC Part 15 Class B
Canada ULC Underwriters Laboratories of Canada
S1871-20121210
ULC ULC-ORD C1023 - Household Burglar
Alarm System Units
ULC ULC-ORD C1076 - Proprietary Burglar
Alarm Units and Systems
ULC CAN/ULC S303 - Local Burglar Alarm
Units and Systems
ULC CAN/ULC S304 - Standard for Signal Re-
ceiving Center and Premise Burglar
Alarm
ULC CAN/ULC S545 - Residential Fire Warn-
ing System Control Units
ULC CAN/ULC S559 - Fire Signal Receiving
Centres and Systems
IC ICES-003 - Information Technology
Equipment (ITE)

• Alarm Communicator
• Fire Alarm Control Panel

• B444-A Plug-in cell module, AMEC LTE
• 2 Antennas
• 1 Literature pack

• Flexible polling intervals
• Resistance to Denial of Service attacks
• 128-bit to 256-bit AES encryption with Cypher Block Chaining
• Anti-replay/anti-substitution keys

• No networking expertise required at field site (no firewall or router settings)
• Signal strength and diagnostics available through keypad and Remote Programing Software (RPS)
• Diagnostic LEDs for on-site troubleshooting

Remote programming of Bosch control panels

The cellular communicator supports secure RPS programming of compatible Bosch control panels

Remote Connect Programming Service support

Remote Connect Programming Service enables a secure control panel connection to RPS using Bosch Cloud services. The service allows a secure TLS connection to a control panel without specific port and router settings and without a static IP or DNS.

Personal notification and control

The cellular communicator supports the Bosch Remote Security Control mobile application and can be configured for personal notification reports to mobile phones or e-mail addresses.

• B9512G/B9512G-E, B8512G/B8512G-E
• B6512/B5512/B4512/B3512, B5512E/ B4512E/B3512E control panel with firmware v3.09 or higher (direct insertion)
• The module is compatible with most Bosch control panels when used with a B450 Conettix Plug-in Communicator Interface with firmware v3.09 or higher. Refer to the B450 datasheet for complete control panel compatibility listings.
• B465 Conettix Universal Dual Path Communicator with firmware v2.09 or higher.
• B40-P, B40-MB25, B40-MB50 auxiliary indoor/ outdoor antennas

• UL CP-01-2010 Control Panel Standard -Features for False Alarm Reduction
• UL UL 864 - Standard for Control Units and Accessories for Fire Alarm Systems (10th edition)
• UL UL 1076 - Proprietary Burglar Alarm Units and Systems
• UL UL 1610 - Central Station Burglar Alarm Units
• UL UL 365 - Police Station Connected Bur- glar Alarm Units
• UL UL 609 - Standard for Local Burglar Alarm Units and Systems
• UL UL 636 - Holdup Alarm Units and Sys- tems
• UL UL 985 - Household Fire Warning Sys- tem Units (6th edition)
• UL UL 1023 - Household Burglar Alarm Sys- tem Units
• UL UL 1635 - Standard for Digital Alarm Communicator System Units
• FCC Part 15 Class B

• ULC Underwriters Laboratories of Canada S1871-20121210
• ULC ULC-ORD C1023 - Household Burglar Alarm System Units
• ULC ULC-ORD C1076 - Proprietary Burglar Alarm Units and Systems
• ULC CAN/ULC S303 - Local Burglar Alarm Units and Systems
• ULC CAN/ULC S304 - Standard for Signal Re- ceiving Center and Premise Burglar Alarm
• ULC CAN/ULC S545 - Residential Fire Warn- ing System Control Units
• ULC CAN/ULC S559 - Fire Signal Receiving Centres and Systems
• ICES-003 - Information Technology Equipment (ITE)