Hard Drive Adapters

Boost system speed and performance by adding a PCIe M.2 SSD to your PCSupports PCIe M.2 SSDs (NVMe and AHCI): 2242, 2260, 2280, and 22110 drivesCompatible with PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 and PCIe 1.0Fast and easy setup...

Marketing Information: The QM2-2P10G1TB allows you to easily add two M.2 NVMe SSDs and 10GbE RJ45 connectivity to your QNAP NAS. Compared with the SATA interface, the QM2-2P10G1TB's PCIe Gen3 x 8 interface provides higher bandwidth to deliver faster...

Certifications & Standards: CE FCC Environmentally Friendly: Yes[custom-specifications]SpecificationsManufacturer: QNAP SystemsManufacturer Part Number: QDA-U2MPManufacturer Website Address: http://www.qnap.comBrand Name: QNAPProduct Model:...

Improve system performance, recover data, or create a redundant data backup by adding two M.2 solid-state drives (SSD) to your desktop PCWide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230)Two M...

Connect a SATA device to an IDE/ATA motherboard or controller cardComplete hardware solution; no software requiredSupport for 48-bit Logical Block Addressing (LBA)Compliant with SATA revision 1.0 specificationSupports SATA I/II/III (1.5/3/6Gbps)...

HIGH PERFORMANCE: Install 2 PCIe 3.0 M.2 SSDs (NVMe or AHCI) into your workstation or server for read/write speeds up to 3GB/s and 2.8GB/s for single-drives or 2.4GB/s and 1.42GB/s (per drive) for 2WIDE COMPATIBILITY: Dual M.2 PCIe SSD adapter card was...

HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form...

Expand the storage and improve the performance of your computer, with slots for two M.2 SATA SSDs and one M.2 PCIe SSDSupports PCI Express 3.0 (x4), ideal for a high-performance M.2 PCIe SSD (NVMe)SATA slots feature a passthrough design, so your drives...

Protect your M.2 (NGFF) SSD in any 2.5in application with enclosed housingAdd M.2 SSD performance to any computer system by converting M.2 to SATABroad compatibility with support for the most common SATA M.2 SSDs (2230, 2242, 2260, 2280)Not compatible...

Marketing Information: Utilize an available PCIe 4.0 x4 expansion slot for the installation, removal, or interchange of PCIe M.2 SSDs. The drive tray accommodates M-Key M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 sizes.Toolless InstallationInstall an M.2...

Increase your system speed and performance cost-effectively, by adding an M.2 PCIe NVMe SSD to your PC or serverAdapter supports one M.2 PCIe NVMe SSD (M-Key)U.2 (SFF-8639) host interfaceFast and easy setup with native OS supportBackward compatible with...

Marketing Information: Convert and connect a PCIe M.2 NVMe/AHCI SSD to a 2.5inch form factor to install in a U.3 drive bay or backplane.Adapt While Retaining PerformanceChange the form factor of a 2242, 2260, or 2280 M.2 NVMe drive while maintaining PCIe...

Compatible with 12Gbps SAS drives and backward compatible with 6Gbps SAS and SATA drivesEquipped with a full-profile bracket and includes a half-height/low-profile bracket for installation in small form-factor computersMarketing Information: This...

Compliant with SATA revision I/II/III (1.5/3.0/6.0 Gbps)Marketing Information: The MSAT2SAT3 mSATA to SATA adapter enables you to connect a standard SATA drive to an available mSATA port. The adapter improves system capacity by enabling an mSATA port to...

HIGH PERFORMANCE: Install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer or server through an available x8 or x16 PCI Express 4.0 slot for ultra-fast data access, capable of reaching high performance read and write speeds up to 7.8GBps per driveWIDE...

Marketing Information: This Quad M.2 PCIe SSD Adapter adds up to four high performance PCIe M.2 SSDs (NVMe and AHCI) using the PCIe x16 slot of a desktop, workstation, or server. Boost System Performance Take full advantage of the fast performance and...

Marketing Information: Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to an M.2 NGFF SATA SSD. Perfect for custom projects and applications, this USB to M.2 SATA converter supports all models...

Boost system performance by adding an enterprise-class U.2 PCIe NVMe SSD to your PC or serverAdapter supports one U.2 PCIe SSD (NVMe and AHCI), with a Mini-SAS HD SFF-8643 connectorM.2 PCIe x4 host interfaceCompatible with current PCIe standards and...

Marketing Information: Get ultra-fast data access by adding an NVMe U.2 SSD to your computer. This U.2 to PCIe adapter lets you add a high-speed, U.2 (4-lane PCIe) 2.5"" NVMe SSD, such as the Intel® 750 Series drive, to a PC with an available x4 PCI...

ADD HIGH PERFORMANCE U.3 STORAGE: Add a 2.5 inch U.3 NVMe SSD into a PCIe 4.0 x4/x8/x16 slot in a desktop or server, enabling ultra-fast data access; Supports SFF-TA-1001 drives up to 15mm in height; Not compatible with U.2 drivesUNIVERSAL COMPATIBILITY:...

Add an enterprise-class PCIe NVMe 2.5 in. U.2 SSD capability to your PC or serverPCI Express 3.0x4 lane host adapterCompatible with PCIe 3.0 and PCIe 2.0 motherboardsMarketing Information: Unleash the performance of your desktop PC or server with this...

Marketing Information: SSD to SATA Adapter Improves Performance of Your SATA Computer This adapter converts your M.2 NGFF SSD drive into a 2.5-inch SATA SSD for use with a standard SATA-enabled computer. The open-frame P960-001-M2-NE supports mount drive...