HPE AP-615 Tri Band IEEE 802.11 a/b/g/n/ac/ax 3.60 Gbit/s Wireless Access Point - Indoor - 6 GHz, 5 GHz, 2.40 GHz - Internal - MIMO - (S3J34A)

Marketing Information:

HPE Aruba Networking 610 series Wi-Fi 6E campus access points

Fast, resilient, and secure Wi-Fi 6E connectivity in a compact and affordable platform

For enterprises who need more wireless capacity and/or wider channels, HPE Aruba Networking 610 Series Campus APs are designed to take advantage of the newly available 6 GHz spectrum using a unique dual-radio/tri-band architecture. Adding support for the 6 GHz band to the traditional 2.4 GHz and 5 GHz bands more than doubles the available wireless capacity in a wireless network - so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud.

Unique to the 610 Series features two radios that can be tuned to any two of the three available spectrum bands for Wi-Fi (2.4 GHz, 5 GHz, 6 GHz).

This flexibility provides a cost-effective and compact platform that delivers full tri-band coverage as part of a multi-AP deployment and can be used with software that will intelligently and flexibly configure the radios of each of these dual-radio APs.

More capacity and wider channels

The 610 Series APs are designed to take advantage of Wi-Fi 6E and the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. Its two 2x2 MIMO radios deliver a combined peak data rate of up to 3.6 Gbps when configured for concurrent 5 GHz and 6 GHz operation.

Advantages of 6 GHz

Wi-Fi 6E provides up to 1200 MHz of additional unlicensed spectrum in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices.

Device class support

The 610 Series APs are part of the low power indoor (LPI) device class. This fixed indoor-only class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services, which is required for standard class APs.

Wireless LAN Standard: IEEE 802.11 a/b/g/n/ac/ax

Bluetooth Standard: Bluetooth 5

Network Band: Tri Band

Frequency Band: 6 GHz,5 GHz,2.40 GHz

Indoor/Outdoor: Indoor

Wireless Transmission Speed: 3.60 Gbit/s

MIMO Technology: Yes

Beamforming Technology: Yes

Data Encryption: Yes

Encryption Standard: WPA,WPA2,WPA3,WPA3-ENT,WPA3-SAE,WPA3-CNSA,WPA2-ENT,WPA-ENT,WPA2-SAE

AI-powered: Yes

Ethernet Technology: 2.5 Gigabit Ethernet

Number of Network (RJ-45) Ports: 1

PoE PD Port: Yes

USB: Yes

USB Standard: USB 2.0 Type A

Wi-Fi Generation: Wi-Fi 6E

Power Consumption: 12.50 W

Form Factor: Ceiling Mountable

Antenna Form Factor: Internal

Height: 1.54" (39 mm)

Width: 6.30" (160 mm)

Depth: 6.30" (160 mm)

Weight (Approximate): 1.15 lb (520 g)