StarTech.com 3m (9.8ft) LC to SC (UPC) OS2 Single Mode Simplex Fiber Optic Cable, 9/125µm, 40G/100G, LSZH Fiber Patch Cord - OS2 (SPSMLCSC-OS2-3M)
Have questions?
1-844-836-8268
Ask an Experts-
Canadian distributor
Proud Canadian business since 2007
-
IT experts available
Consulting & Technicial services
-
Pre-configuration services
From VoiP phone to Clustered servers
-
Delivering across Canada
Shipping UPS Fedex & Purolator
Marketing Information:
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to LC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
Cable Type: Fiber Optic
Cable Characteristic: Patch Cable
Fiber Optic Mode: Single-mode
Fiber Type: Simplex
Core/Cladding Diameter: 9/125 µm
Fiber Category: OS2
Cable Length: 9.8 ft
Connector Type on First End: LC Network - Male
Connector Gender on First End: Male
Connector on First End Details: 1 x LC Network - Male
Connector Type on Second End: SC Network - Male
Connector Gender on Second End: Male
Connector on Second End Details: 1 x SC Network - Male
Jacket Type: LSZH
Device Supported: Network Device,Server,Switch,Storage Device
Data Transfer Rate: 100 Gbit/s
Features: Ultra Physical Contact (UPC),Bend Insensitive,Flame Retardant,Bend Resistant,Passive
Color Family: Yellow
Product Color: Yellow
Product Material: Polypropylene
Jacket Material: Low Smoke Zero Halogen
Environmentally Friendly: Yes
Limited Warranty: Lifetime
- SIMPLEX OS2 CABLE: Single Mode Simplex OS2 Fiber Cable is immune to EMI and optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count
- QUALITY CONSTRUCTION: LC/SC-UPC ends for improved return loss over PC polish; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
- SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
- COMPATIBILITY: Simplex Single Mode Fiber Patch Cord supports 40G/100G networks; Backward compatible with OS1; High micro-bend resistance facilitates tight bends in complex installations; Ideal for point-to-point setups or single-fiber NICs and SFPs
- SPECS: 3m (9.8 foot); OS2 Single Mode; LC/SC (UPC) Simplex; 100Gbps; 9/125µm; 1260-1625nm Laser Optimized; Insertion Loss: ≤0.3dB; Return Loss: ≥55dB; Cable OD: 2mm; Bend Radius: 10mm (0.39in) loaded/unloaded
[custom-specifications]
Specifications | |
Manufacturer | StarTech.com |
Manufacturer Part Number | SPSMLCSCOS23M |
Manufacturer Website Address | http://www.startech.com |
Brand Name | StarTech.com |
Product Name | Fiber Optic Simplex Patch Network Cable |
Packaged Quantity | 1 |
Product Type | Network Cable |
Technical Information | |
Cable Type | Fiber Optic |
Cable Characteristic | Patch Cable |
Fiber Optic Mode | Single-mode |
Fiber Type | Simplex |
Core/Cladding Diameter | 9/125 µm |
Fiber Category | OS2 |
Cable Length | 9.8 ft |
Connector Type on First End | LC Network - Male |
Connector Gender on First End | Male |
Connector on First End Details | 1 x LC Network - Male |
Connector Type on Second End | SC Network - Male |
Connector Gender on Second End | Male |
Connector on Second End Details | 1 x SC Network - Male |
Jacket Type | LSZH |
Device Supported | Network Device,Server,Switch,Storage Device |
Data Transfer Rate | 100 Gbit/s |
Features | Ultra Physical Contact (UPC),Bend Insensitive,Flame Retardant,Bend Resistant,Passive |
Physical Characteristics | |
Color Family | Yellow |
Product Color | Yellow |
Product Material | Polypropylene |
Jacket Material | Low Smoke Zero Halogen |
Miscellaneous | |
Environmentally Friendly | Yes |
Warranty | |
Limited Warranty | Lifetime |
[/custom-specifications]
[custom-user-manual]
Available Documentation:
Additional-pdf1
[/custom-user-manual]
Warranty Infomartion
Lifetime