Altronix EoC and PoE/PoE+ Transceiver - Network (RJ-45) - 1x PoE+ (RJ-45) Ports - Fast Ethernet - 10/100Base-TX - 1640.4 ft - PoE+ (EBRIDGE100ST)

Marketing Information:

eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com) and is powered by an external midspan, such as the Altronix Netway series. The receiver passes PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 300m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. eBridge100ST is compatible with the following Altronix receivers: eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.

Total Number of Ports: 1

Network (RJ-45): Yes

DVI: No

USB: No

Management Port: No

Number of PoE+ (RJ-45) Ports: 1

Media Type Supported: Twisted Pair

Maximum Distance Supported: 1640.4 ft

Ethernet Technology: Fast Ethernet

Network Technology: 10/100Base-TX

Power Source: PoE+

Height: 1.12" (28.45 mm)

Width: 2.27" (57.66 mm)

Depth: 2.65" (67.18 mm)

Weight (Approximate): 99.8 g

Environmentally Friendly: Yes

Country of Origin: United States

Limited Warranty: Lifetime