TRENDnet 10dBi Wireless N300 Outdoor PoE Pre-configured Point-to-Point Bridge Bundle Kit, Two Pre-Configured Wireless N Access Points, (TEW-740APBO2K)

• POINT TO POINT BRIDGE:2 10 dBi Outdoor PoE Access Points with wireless N300 point-to-point networking (2.4 GHz)
• PRECONFIGURED KIT: 2 x Preconfigured Wireless N access points. Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit
• POE POWER ADAPTER: Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m (197 ft.)
• WIRELESS N300 (2.4 GHz): The N300 Oudoor access point kit is compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps
• WIRELESS MODES: Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes
• OUTDOOR READY: The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60° C (-4 - 140° F).
• DIRECTIONAL ANTENNA: The 10 dBi Access Point has a built-in 10 dBi directional antenna
• NDAA / TAA compliant (U.S. and Canada only)

TRENDnet's 10 dBi Wireless N300 Outdoor PoE Preconfigured Point-to-Point Bridge Kit, model TEW-740APBO2K, is the easiest way for you to provide long-distance, point-to-point wireless connectivity. The long-range outdoor access point kit is ideal for use with building-to-building communications, utility poles, surveillance solutions, and more.
Reduce installation time and infrastructure costs. This preconfigured directional point-to-point bridge kit is ready to install out of the box, with no additional WiFi configurations required*. Conveniently link two locations together with Wireless N300 speeds and performance, especially when you are unable to run network cables.
The durable access point housing is IP56 weather rated housing, and designed and tested for harsh, outdoor environments. This long-range outdoor access point bridge kit features built-in, high-performance 10 dBi antennas, and conveniently includes both wall and pole mounting hardware for installation flexibility.

Reduce installation cost and setup time with this preconfigured, and pre-encrypted long-range outdoor wireless access point bridge kit.

Included passive PoE injector provides power and data over a single Ethernet cable with a maximum distance of 60m (197 ft.).

Durable enclosure with an IP56 outdoor weather rating, and an operating temperature range of -22° - 60° C (-7.6° - 140° F).

More from the Manufacturer

• Wall Mountable
• Pole-mountable

• 2 x TEW-740APBO
• Quick Installation Guide
• Proprietary/Passive PoE injectors
• Power adapters (12V DC, 1A)
• Grounding wires
• Mounting hardware
• 2 x Rubber seals